Services

Gas risers and building installations

The riser is the main gas line running from the building meter bank up to each flat. Devka Doğalgaz works with apartment and estate management in Antalya to design and install building-wide gas systems.

Yellow painted natural gas riser pipes running up an apartment building facade

The first step in a building project is calculating the riser diameter from the number of flats and appliance capacities. Meter room position, ventilation openings, the riser route and expansion joint crossings are all clearly shown in the project and approved by the distribution company.

During installation, external pipework is protected against corrosion, clamp spacing follows the regulations and welded joints are made by certified personnel. We plan the works so that daily life in the building is disrupted as little as possible.

When the riser is complete, a combined tightness test is carried out and a single technical report is issued for the building. Management deals with one point of contact, and residents who want indoor pipework receive a separate quotation.

What this service includes

  • Riser diameter calculation for the building
  • Meter room and ventilation solutions
  • Building-wide project drawing and approval
  • Certified welding and corrosion protection
  • Combined tightness test and technical report
  • One point of contact for building management

How we deliver this service

The four steps from survey to handover are the same on every job, so you always know what happens next.

  1. Free site survey

    We visit your address, inspect the flat and the riser line, and give you a clear written quotation.

  2. Project and approval

    We draw the indoor pipework project to TS 7363 and get it approved by the distribution company.

  3. Pipework and testing

    We install to the approved project, run the pressure tightness test and prepare the technical report.

  4. Gas commissioning

    We book the inspection appointment with the distribution company and attend on the day gas is opened.

Why choose Devka Doğalgaz?

  • Indoor pipework team certified by the gas distribution company
  • Free site survey and an itemised written quotation
  • Authorised Vaillant dealer installation, commissioning and warranty registration
  • Workmanship guarantee and after-sales service support

Where we deliver this service

We carry out same-day surveys in the central districts and scheduled surveys in the others. Each district page lists the neighbourhoods we cover.

Posts related to this service

  • 10 Important Steps for Safe Installation

    Gas installation

    Home Natural Gas Installation: 10 Steps for Safe Setup

    The first step in arranging natural gas for your home is proper planning Connecting natural gas to your home involves more than simply buying a combi boiler and laying a few pipes. The installation project must be prepared in compliance with the distributor’s requirements, while the combi boiler and radiator capacities must be calculated correctly. A poorly planned system may consume more fuel, heat rooms unevenly or require deficiencies to be corrected before the gas activation process. At Devka Dogalgaz, we assess the home’s floor area, orientation, insulation level, number of rooms and exi

  • Pressure testing a natural gas installation with a manometer

    Gas installation

    Gas Tightness Test: What It Is and Why It Is Mandatory

    Once an indoor natural gas installation is finished, its tightness must be proven before gas is actually turned on. This guide explains what a gas tightness test is, which rules govern it in Turkey, and why it cannot be skipped.

  • Installation drawing and gas meter for a natural gas subscription

    Gas installation

    How to Get a Natural Gas Subscription in Antalya: Step-by-Step

    Connecting natural gas in Antalya runs through Enerya Antalya, a certified installation firm, and a leak-tightness test. Here is every step, in order.

All posts

Call Now WhatsApp